Answer
May 30, 2023 - 03:44 PM
You application method of down streaming the purple magic and apply with M5 twist is an excellent choice.
Agitation is one of the three cleaning powers those being
1) The Right Chemical
2) Agitation (Brush, Scrub on delicate surfaces) (Pressure on hard surface)
3) Heat, a hot water pressure washer
For Alucobond you will want low pressure spraying, the M5 does that for low pressure spraying you
and while for many projects scrubbing is not required,
Scrubbing will definitely speed up the process and improve the results.
Check your Down Stream injector for it's rated mix/dilution rate ...
When using a down stream injector you will need to know the dilution rate
For instance 1 to 10 (10%) is common
This rating creates a solution where there is 11 gallons output (water and chemical mixed together), 10 gallons of water and 1 gallon of Chemical
So when drawing Purple Magic concentrate "as is" from the result will be about 11 ounces per gallon this is a strong mix for heavy soiling.
For standard soiling you might go as low as a 5% solution
For a 1 to 10 Injector dilute the Purple Magic solution in the draw bucket by 50%
Adding 1 gallon of water and 1 gallon of Purple Magic to the bucket you are drawing from.
Add less water to make the solution stronger.
However...
If you have a 20 to 1 (5%) down stream injector that will be about a 5% solution and you would not be able to get the sprayed mixture any stronger.
ALUCOBOND is the original aluminum composite material (ACM) used in the architectural and building cladding industries.
For over 50 years, ALUCOBOND has been leading the world in design innovation, giving shape to great ideas with reliability, a dedicated customer service team and an outstanding stocking program.
link: https://www.alucobondusa.com/
Agitation is one of the three cleaning powers those being
1) The Right Chemical
2) Agitation (Brush, Scrub on delicate surfaces) (Pressure on hard surface)
3) Heat, a hot water pressure washer
For Alucobond you will want low pressure spraying, the M5 does that for low pressure spraying you
and while for many projects scrubbing is not required,
Scrubbing will definitely speed up the process and improve the results.
Check your Down Stream injector for it's rated mix/dilution rate ...
When using a down stream injector you will need to know the dilution rate
For instance 1 to 10 (10%) is common
This rating creates a solution where there is 11 gallons output (water and chemical mixed together), 10 gallons of water and 1 gallon of Chemical
So when drawing Purple Magic concentrate "as is" from the result will be about 11 ounces per gallon this is a strong mix for heavy soiling.
For standard soiling you might go as low as a 5% solution
For a 1 to 10 Injector dilute the Purple Magic solution in the draw bucket by 50%
Adding 1 gallon of water and 1 gallon of Purple Magic to the bucket you are drawing from.
Add less water to make the solution stronger.
However...
If you have a 20 to 1 (5%) down stream injector that will be about a 5% solution and you would not be able to get the sprayed mixture any stronger.
ALUCOBOND is the original aluminum composite material (ACM) used in the architectural and building cladding industries.
For over 50 years, ALUCOBOND has been leading the world in design innovation, giving shape to great ideas with reliability, a dedicated customer service team and an outstanding stocking program.
link: https://www.alucobondusa.com/
