Answer
Apr 03, 2023 - 12:05 PM
To install an RO membrane, you will first detach the hoses at the top of the housing. Then unscrew the bolts holding the 2 C-Clamps. You will then see the nub from the RO membrane, its easiest to remove, by clamping onto the num with a Vice Grip. Pull it out. On your replacement RO membrane, you will notice that one end has an O-Ring and the other side doesn't, insert it in with the ORing side on the top. Finally, put everything back on, the caps, clamps and hoses. Then you're good to go. Please remember to flush the RO.
